Technician repairing an LED TV circuit board with a soldering iron
  1. Home
  2. LED LCD TV Repairing in Kolkata

All brands · All faults

LED LCD TV Repairing in Kolkata

Multi-brand LED and LCD TV repair with board-level diagnosis: backlight, power supply, mainboard, T-con, panel, sound and Smart TV software.

LED TV repair and LCD TV repair under one roof

Whether you have a five-year-old Full HD LED TV, a brand-new 4K Smart TV or an older LCD set that has been in the family for years, the repair process is the same: find the failed component, fix it properly, and test the TV long enough to be sure the fault is gone.

We repair Samsung, Sony, LG, Videocon, Panasonic, Philips, Onida, TCL, Mi, OnePlus, Haier, Vu and most other brands sold in India. If your TV is still under the manufacturer's warranty, contact the manufacturer first; once it isn't, independent repair is usually the faster and cheaper route.

Two technicians diagnosing a TV mainboard on the workbench
Every TV is diagnosed on the bench before we quote.

The repairs we do every day

LED Backlight Repair

A TV that plays sound with a black or very dim screen has almost always lost its backlight. In LED TVs the LEDs are wired in series, so when one fails the whole string goes dark. We replace the complete strip set with matched strips, check the driver circuit on the power board, and re-seat the diffuser sheets so there are no shadows or hot spots afterwards.

Power Supply Board

No standby light, a TV that clicks but never starts, or one that died after a power cut usually has a power supply fault. We test the board under load, find the failed capacitor, MOSFET, PWM controller or fuse, and repair it rather than selling you a new board that might not be available for your model.

Mainboard & T-Con

The mainboard runs the software and processes the picture; the T-con board drives the panel. Boot loops, frozen menus, wrong colours, ghosting, half-screen and some line faults start here. We diagnose with the right test equipment and repair at component level, including eMMC and firmware work.

Panel & Display Faults

Lines, bands and half-screen faults can come from the panel itself or from the boards and cables that feed it. We test every link in that chain before we call it a panel fault. If the panel really is damaged, we tell you straight, because a replacement panel can cost close to a new TV.

Sound & Ports

No audio, distorted speakers, HDMI ports that don't detect your set-top box, broken USB ports and ARC links that won't talk to the soundbar are all repairable on the mainboard.

Smart TV & Software

Smart TVs are computers, and they fail like computers: corrupted updates, worn storage, Wi-Fi modules that drop out. We reload firmware, repair or replace eMMC storage and set up Tizen, webOS, Android TV and Google TV properly.

Is it worth repairing? For backlight, power, board, port and software faults, almost always. For a physically cracked panel, rarely. We tell you which before you spend anything.

Common LED TV faults at a glance

SymptomUsual causeRepairable?
Sound but no pictureLED backlight strips, backlight driver on the power board, or (less often) the T-con board.Usually repairable. Backlight strip replacement is our most common job.
Lines on the screenPanel COF/bonding, T-con board, LVDS/V-by-One ribbon cables.Board and cable faults are repairable; panel bonding faults need assessment first.
TV won't turn onPower supply board (capacitors, MOSFETs, PWM IC), standby circuit, mainboard short.Power supply faults are among the most reliably repairable.
Dark patches or uneven lightIndividual LED failure, lens caps fallen off, diffuser or reflector sheet damage.Repairable. We replace the strips and re-seat the optical sheets.
Flickering or restartingDried-out capacitors, backlight driver, firmware/eMMC corruption.Usually repairable at board level or with a software reload.
Picture but no soundAudio amplifier IC, speaker coils, mainboard audio section, settings.Repairable, often the same day once diagnosed.
Smart features not workingFirmware, eMMC storage chip, Wi-Fi module, mainboard.Often fixed with a software reload; eMMC replacement when storage has failed.

How a repair works

  1. Tell us the fault. Email or use the form with your TV brand, model number and what it is doing. A photo of the screen helps a lot.
  2. Diagnosis. We test the set on the bench, find the failed part and explain the fault in plain language.
  3. Your go-ahead. You get a clear quote before any work starts. No approval, no charge for parts.
  4. Repair & test. We repair, then burn-in test the TV for hours so the fault does not come straight back.

Frequently asked questions

How much does LED TV repair cost in Kolkata?

It depends on the fault and the model. Software and port repairs are at the low end, backlight and power supply repairs in the middle, and panel replacement at the top. We give you a clear quote after diagnosis and nothing is done without your approval.

How long does an LCD or LED TV repair take?

Many repairs are completed within a few days once diagnosed. Jobs that need a specific part ordered take longer, and we tell you the timeline up front.

How do I fix an LED TV with sound but no picture myself?

First check the obvious: a different input, the picture settings, and whether a torch held close to the screen shows a faint image. If it does, the backlight has failed. That repair means opening the TV and handling the panel, which is easy to crack, so it is best left to a workshop.

Do you repair older LCD TVs?

Yes. Older LCD TVs use fluorescent CCFL backlights and inverter boards. We still repair them, alongside modern LED, QLED and OLED sets.

Advice by email

Got a TV that won't behave?

Send us the brand, model number and what it is doing. We will tell you what is likely wrong and what it takes to fix it, before any work starts.